How to Pair Multiple Transmitters to the Icon HD Net Ready
Posted by Support Supervisor, Last modified by Francesca Thompson on 07 August 2017 02:00 PM

  • Please unpair the transmitters. To do this select 'Pair' and then select 'Back'. G1 should read 'Unpaired'.

  • Do the same for G2.

  • Next turn on the Nitrox setting on both G1 and G2.

  • Next go into 'Pre Dive' mode.

  • To see both G1 and G2 in Pre Dive mode, press the third button from the left.

  • Next is the most important step: when you pair the first transmitter, the other transmitter needs to be 0.3 to 0.6 meters / 10 to 20 feet away.

  • After the successful pairing of one transmitter it will be ok to pair the second one.

  • If the transmitters are in close proximity, pair the first transmitter then wait three minutes to pair the second transmitter.
(1 vote(s))
Helpful
Not helpful

Help Desk Software provided and maintained by 21Style